LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
7-Port Industrial Managed Ethernet Switch w/5*10/100/1000Tx and 2*100/1000 SFP Slots (Version 2 Hardware)
Product WarrantySee details >
0%
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
LMX-0702G-SFP-V2
Introduction

Antaira Technologies’ LMX-0702G-SFP-V2 is a 7-port industrial Gigabit managed Ethernet switch embedded with 5*10/100/1000Tx Ethernet ports and 2*100/1000 SFP slots. The LMX-0702G-SFP-V2 is a fully manageable Light Layer 3 Ethernet switch that is pre-loaded with a user?friendly web management console design. It supports a ring network redundancy function using the market’s open standard ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as IGMP, VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks.

 

The LMX-0702G-SFP-V2 is IP30 rated and DIN-rail mountable. The operating temperature of this model ranges from -10°C to 65°C. It also provides high EFT and ESD protection for industrial networking applications, such as power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh environment.

Features
  • Supports 5*10/100/1000Tx Fast Ethernet Ports and 2*100/1000 SFP Slots
  • Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Telnet, CLI Command
  • Supports IGMP v1/v2/v3, up to 1024 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
  • System Warning Setting for Automatic Warning through E-Mail
  • Power Input: 12~48VDC in 6-Pin Terminal Block
  • Reverse Polarity Protection
  • IP30 Protection
  • DIN-Rail or Wall Mountable
  • Operating Temperature Range
  • STD: -10° to 65°C
  • 5-Year Warranty
Package Content
  • 1 – LMX-0702G-SFP-V2
  • 1 – Quick Installation Guide
  • 1 – Wall mounting bracket set with screws
  • 1 – DC cable – 18 AWG & DC jack 5.5 x 2.1mm
Related Resources
Bus Depot
Bus Depot
Intelligent Transportation
Bus Depot
Light Rail
Light Rail
Intelligent Transportation
Light Rail
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
May 16, 2022
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
Responsive 90W PoE Management Solutions
Responsive 90W PoE Management Solutions
March 26, 2021
Responsive 90W PoE Management Solutions
Antaira Product Master Catalog
Antaira Product Master Catalog
March 03, 2020
Antaira Product Master Catalog
Advanced Industrial Managed Ethernet Switches
Advanced Industrial Managed Ethernet Switches
October 18, 2018
Advanced Industrial Managed Ethernet Switches
Technology
IEEE Standards
  • IEEE 802.3 10Base-T Ethernet
  • IEEE 802.3u 100Base-TX Fast Ethernet
  • IEEE 802.3ab 1000Base-T Gigabit Ethernet
  • IEEE 802.3z 1000Base-X Gigabit Fiber
  • IEEE 802.3x Flow Control
  • IEEE 802.1d STP (Spanning Tree Protocol)
  • IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
  • IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
  • ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)
  • IEEE 802.1Q Virtual LANs (VLAN)
  • IEEE 802.1x Network Authentication
  • IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
  • IEEE 802.1ad Stacked VLAN Q-in-Q
Processing Type
Store and Forward
Protocol
IGMP v1/v2/v3, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH/SSL, Modbus/TCP, LLDP, IPv4/IPv6
Flow Control
IEEE 802.3x flow control, back pressure flow control
Software
Configuration
Web Console, Telnet, CLI Command
VLAN Group
4095
IGMP Group
1024 groups
Ethernet Redundancy
STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2(<50ms)
Performance
MAC Table Size
8K
Jumbo Frame
9.6 Kbytes
Memory Buffer
4 Mbits
Transfer Rate
  • 14,880pps for Ethernet Port
  • 148,800pps for Fast Ethernet Port
  • 1,488,000pps for Gigabit Ethernet Port
Switching Architecture
Back-Plane (Switching Fabric): 14Gbps
Ethernet Interface
Ethernet Port Count
5 ports
10/100/1000 BASE-T(X)
5 ports
Fiber Interface
Fiber Port Count
2 ports
100/1000 BASE-(F)X SFP
2 ports
Wavelength
Refers to SFP module
Other Interface
LED Indicator
  • Power 1, Power 2, Fault, Master, Ring: On / Off
  • Fiber Port: Link / Act
  • Ethernet Port: Link / Act
Mechanical Characteristics
Housing
Metal, IP30 protection
Mounting
DIN-Rail mount, Wall mount (Optional)
Dimensions (W × H × D)
54 × 142 × 99 mm
Weight
  • Unit weight : 1.9 lbs
  • Shipping weight : 2.7 lbs
Power Requirements
Power Connection
Removable 6-contact terminal block
Input Voltage
12V–48V DC, Redundant Input
Power Redundancy
Yes
Relay Output
24V DC, 1A resistive
System Power Consumption
7.5 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Environmental Limits
Operating Temperature
-10° to 65° C (14° to 149° F)
Storage Temperature
-40° to 85° C (-40° to 185° F)
Ambient Relative Humidity
5% to 95% non-condensing
Regulatory Approvals
Certifications
FCC, CE
UL 61010-1 / UL 61010-2-201
EMI
  • FCC Part 15 Subpart B Class A,
  • CE EN55032 Class A
  • EN61000-6-4 Class A
EMS
  • CE EN55035/EN 61000-6-2
  • IEC61000-4-2 (ESD)
  • IEC61000-4-3 (RS)
  • IEC61000-4-4 (EFT)
  • IEC61000-4-5 (Surge)
  • IEC61000-4-6 (CS)
  • IEC61000-4-8 (Magnetic Field)
Stability Testing
  • Free Fall: IEC60068-2-32
  • Shock: IEC60068-2-27
  • Vibration: IEC60068-2-6
Green
RoHS Compliant
Warranty
5 years
Download
Models
  • LMX-0702G-SFP-T-V2
    7-Port Industrial Managed Ethernet Switch w/5*10/100/1000Tx and 2*100/1000 SFP Slots. EOT: -40° ~ 75°C. (Version 2 Hardware)